Search
Filters
Close
Availability: Special Order*
SKU: 81372
Manufacturer: SPC Performance
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
$389.94

Adjust front camber and caster ±1.5° on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5° to 6° of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81371. Want to be able to adjust both sides? Use part number #81373. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354.

Add the ability to change camber and caster to your Audi or Volkswagen with SPC's fully adjustable control arms. These arms replace the factory non-adjustable arms, allowing easy on-the-car adjustability after installation. Engineered for both street and track use, the 6061-T6 aluminum ends feature large 18mm threaded steel adjusters to ensure this is the strongest arm set available. Maintenance free ball joints and bushings provide factory levels of noise, vibration, and harshness (NVH) while also giving long service life. Order SPC #81371 for the left side, #81372 for the right side, or #81373 for the complete front end kit. This kit also comes with a replacement knuckle pinch bolt to ease installation as the factory bolt is often frozen in place and must be cut out when replacing the upper control arms. This bolt is also available separately under SPC #21040.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

SPC Performance Audi and VW Right Adjustable Control Arm

Alignment Caster / Camber Control Arm

AUDI & VW CONTROL ARMS RIGHT

ADJ ARM SE

Adjust front camber and caster ±1.5° on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5° to 6° of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81371. Want to be able to adjust both sides? Use part number #81373. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354.

Add the ability to change camber and caster to your Audi or Volkswagen with SPC's fully adjustable control arms. These arms replace the factory non-adjustable arms, allowing easy on-the-car adjustability after installation. Engineered for both street and track use, the 6061-T6 aluminum ends feature large 18mm threaded steel adjusters to ensure this is the strongest arm set available. Maintenance free ball joints and bushings provide factory levels of noise, vibration, and harshness (NVH) while also giving long service life. Order SPC #81371 for the left side, #81372 for the right side, or #81373 for the complete front end kit. This kit also comes with a replacement knuckle pinch bolt to ease installation as the factory bolt is often frozen in place and must be cut out when replacing the upper control arms. This bolt is also available separately under SPC #21040.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

SPC Performance Audi and VW Right Adjustable Control Arm

Alignment Caster / Camber Control Arm

AUDI & VW CONTROL ARMS RIGHT

ADJ ARM SE

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Audi

    A6

      2011 Base - 2010 Base - 2009 Base - 2008 Base - 2007 Base - 2006 Base

    A6 Quattro

      2011 Avant - 2011 Base - 2010 Avant - 2010 Base - 2009 Avant - 2009 Base - 2008 Base - 2008 Avant - 2007 Avant - 2007 Base - 2006 Avant - 2006 Base - 2005 Base

    S6

      2011 Base - 2010 Base - 2009 Base - 2008 Base - 2007 Base

    A8 Quattro

      2010 Base - 2010 L - 2009 Base - 2009 L - 2008 L - 2008 Base - 2007 Base - 2007 L - 2006 Base - 2006 L - 2005 L - 2005 Base - 2004 L

    S8

      2009 Base - 2008 Base - 2007 Base

    Allroad Quattro

      2005 Base

Volkswagen

    Phaeton

      2006 V8 - 2006 W12 - 2005 V8 - 2005 W12 - 2004 V8 - 2004 W12
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.