RockJock Antirock Sway Bar Kit Universal 50in x 1in Bar 18in Aluminum Arms

RockJocks Antirock(R) sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 50 in. torsion bar length and 18 in. long billet aluminum arms. Vertical links use a 14 in. long 1/2 in. x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 in. x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 in. x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 50 in. bar is a 1 in. diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.

RockJock Antirock Sway Bar Kit Universal 50in x 1in Bar 18in Aluminum Arms

Antirock® Sway Bar Kit; 50 in. x 1 in. Bar; 18 in. Aluminum Arms;

Antirock® Sway Bar Kit

Sway Bar Assembly