Banks Power Pressure Sensor Remote Mount Kit for High-Temperature-Drive Pressure Measurements - ( Banks Power 66422 )

This kit is required for pressure readings to be obtained directly from the exhaust manifold, or compressor inlet/outlet air pressure measurements if temperatures will exceed 220° F. Sensors directly fitted to exhaust manifolds will deteriorate extremely fast, therefore, a remote mount kit must be present to isolate the temperature from the sensor and ensure longevity and accuracy of the sensor. Hardware is included to bulkhead mount the pressure sensor or mount it using a P-Clamp. Works with Banks pressure sensors, and both 4-channel and 5-channel Analog or Frequency modules. Includes all necessary hardware.

This kit is required for pressure readings to be obtained directly from the exhaust manifold, or compressor inlet/outlet air pressure measurements if temperatures will exceed 220 F. Sensors directly fitted to exhaust manifolds will deteriorate extremely fast, therefore, a remote mount kit must be present to isolate the temperature from the sensor and ensure longevity and accuracy of the sensor. Hardware is included to bulkhead mount the pressure sensor, or mount it using a P-Clamp.

Obtain high-temp air pressure readings without destroying your sensor(s). In high-temp situations, such as exhaust manifold temperature, mounting a sensor directly to the exhaust manifold will result in sensor failure. Mounting the sensor remotely allows safer reading and longer sensor life, and improved accuracy.

Banks Power Pressure Sensor Remote Mount Kit for High-Temperature/Drive Pressure Measurements

Gas Pressure Sensor Remote Mount Kit; For High-Temperature Pressure; May Exceed 220 F;

Pressure Sensor Remote Mount Kit for High-Temperature/Drive Pressure Measurements

Gas Pressure Sensor Remote Mount Kit

Pressure Sensor Remote Mount Kit

Tuners and Programmers

ExhstGasSensorBrackt

Pressure Sensor

Gauge Pod