Our Traction Bars are designed to reduce rear leaf spring axle wrap caused by lift blocks and oversized tires. Typically the travel cycle of the Super Duty rear axle is an arch. Fabtech's exclusive traction bar shackle system allows the bars to float with the arched travel of the rear axle. This provides a non-binding, smooth highway ride, while still providing positive resistance to torque loads, reducing axle wrap and increasing tire traction.

Obtain increased traction while reducing axle wrap and driveline vibration with our tubular Traction Bars. Vehicle specific applications for proper fitment include solid and floating style Traction Bars. All Traction Bars have been designed to allow full wheel travel without binding for smooth highway ride. As a 100 percent bolt on installation these Traction Bars provide functionality and good looks.

88. INSTALLATION OF TRACTION BARS MAY NOT ELIMINATE CARRIER BEARING VIBRATION ON SOME VEHICLES.; 89. TO USE WITH FABTECH REAR LEAF SPRINGS OR AMP STEPS ORDER FTS92025 BRACKET KIT.; 90. MUST HAVE MINIMUM 3 IN. TALL BLOCKS FOR PROPER CLEARANCE.

88. INSTALLATION OF TRACTION BARS MAY NOT ELIMINATE CARRIER BEARING VIBRATION ON SOME VEHICLES.; 89. TO USE WITH FABTECH REAR LEAF SPRINGS OR AMP STEPS ORDER FTS92025 BRACKET KIT.; 90. MUST HAVE MINIMUM 3" TALL BLOCKS FOR PROPER CLEARANCE.

Fabtech 99-10 Ford F250/350 4WD Floating Rear Traction Bar System

SUPER DUTY TRACTION BARS BLACK

SUPER DUTY TRCTN BARS BLACK

Suspension Traction Bar

SUPER DUTY TRCTN BAR

TractionBar