Fabtech 19-21 Ram 1500 Non Rebel 2-4WD 3in Bj UCA Sys w-Perf Shks

This 3in Ram lift kit has been designed to provide a superior ride quality with clearance to run 35in tires for both on and offroad use. The mild lift height is subtle yet gives the vehicle a commanding stance without over doing it. Fabtech engineers took considerable time to cycle and test the 3in lift with their heavy duty ball joint upper control arms. There is no bind throughout the suspension travel and steering operation. The steering will go full lock to lock without any loss of the turning radius. The factory Ram upper control arm is made of plastic with a light duty ball joint. Fabtech's Upper Control Arms are constructed of tubular steel with large robust ball joints that provide strength to the suspension. These Fabtech upper control arms are a substantial upgrade for aggressive offroad use. Front lift is accomplished with a steel spacer that bolts to the top of factory coilover shock and a small coil spring collar that is placed below the coil spring. The combination of these two spacers provide a full 3in of lift while providing proper suspension travel without bind. The rear suspension receives a coil spring spacer to lift the vehicle. This helps keep the vehicle's factory stance without effecting the ride quality. This Ram lift kit includes Fabtech Performance shocks. They are a twin tube shock that will provide a good highway ride with the ability to handle offroad use. This high quality 3in Ram lift kit is easy to install and will provide years of service while adding strength and reliability to the vehicle.

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.

TIRE SIZE - 35/12.50R18 WHEEL - 18X9 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 14. CAN NOT USE OEM WHEEL AND TIRE.; 130. WILL NOT FIT FACTORY AIR SUSPENSION.; 200. DOES NOT FIT REBEL MODELS; 203. DOES NOT FIT 2019 RAM 1500 CLASSIC MODELS

Fabtech 19-20 Ram 1500 4WD (Non Rebel) 3in Ball Joint UCA System w/Rear Perf. Shocks

Performance Lift System w/Shocks; 3 in. Lift; For PN[FTS23202/FTS23204/FTS7188];

3" BJ UCA SYS W/ PERF SHKS 2019-20 RAM 1500 NON REBEL

Performance Lift System w/Shocks

3" BJ UCA SYS W/ PER

Suspension Lift Kit

LftKt-Suspw/Shock