Fabtech 19-21 Ram 1500 2WD-4WD 3in Bj UCA Sys w-Dl 2-5&2-25

This 3in Ram lift kit has been designed to provide a superior ride quality with clearance to run 35in tires for both on and offroad use. The mild lift height is subtle yet gives the vehicle a commanding stance without over doing it. Fabtech engineers took considerable time to cycle and test the 3in lift with their heavy duty ball joint upper control arms. There is no bind throughout the suspension travel and steering operation. The steering will go full lock to lock without any loss of the turning radius. The factory Ram upper control arm is made of plastic with a light duty ball joint. Fabtech's Upper Control Arms are constructed of tubular steel with large robust ball joints that provide strength to the suspension. These Fabtech upper control arms are a substantial upgrade for aggressive offroad use. Dirt Logic 2.50 Coilover shocks replace the factory shocks for 3in of lift with outstanding damping capacity for offroad use. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. The rear suspension receives a coil spring spacer to lift the vehicle. This helps keep the vehicle's factory stance without effecting the ride quality. This Ram lift kit comes with Dirt Logic 2.25 rear shocks. They will provide a superior ride quality both on and offroad with excellent damping for offroad use. This high quality 3in Ram lift kit is easy to install and will provide years of service while adding strength and reliability to the vehicle.

This new 4 System capitalizes on Toyota Tundras large wheelwell opening to allow use of 35 tall tires with minimum lift height. The design of this 4 System is a new style of suspension that delivers improved performance with fewer parts, and comes with an affordable price. The system includes replacement upper control with a .120 wall DOM arm with heavy duty extended range ball joints that provide additional strength to the front suspension. Heavy duty extended length steering knuckles are included to provide proper functionality of the factory ESC (Electronic Stability Control) with 35 tall tires. The knuckles retain the stock track width keeping the tires under the front fenders. The front differential is relocated to keep CV angles proper during the full range of travel. Front bump stop extensions and brake hose relocation brackets complete the front suspension. Rear lift comes from a 1 lift block and u-bolt system to level the stance of the vehicle. The 4 System is available with a spacer system to retain the factory Coilover shocks and rear Performance shocks.

TIRE SIZE - 35/12.50R18 WHEEL - 18X9 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 14. CAN NOT USE OEM WHEEL AND TIRE.; 130. WILL NOT FIT FACTORY AIR SUSPENSION.; 171. WILL NOT FIT DIESEL MODELS; 203. DOES NOT FIT 2019 RAM 1500 CLASSIC MODELS

Ball Joint Control Arm Lift System; 3 in. Lift; w/Dirt Logic 2.5 in./2.25 in.; For PN[FTS23202/FTS23207/FTS811472];

Fabtech 19-20 Ram 1500/Rebel 4WD 3in Ball Joint UCA System w/DL 2.5 Coilovers & Rear DL Shocks

3" BJ UCA SYS W/DL 2.5&2.25 2019-20 RAM 1500

Ball Joint Control Arm Lift System

3" BJ UCA SYS W/DL 2

Suspension Lift Kit

LftKt-Suspw/Shock