Search
Filters
Close

Fabtech 08-10 Ford F250-350 4WD 8in Rad Arm Sys w-Dlss 4-0 C-O& Rr Dlss

Availability: Special Order*
SKU: K2066DL
FREIGHT REQUIRED, you will be contacted with the freight cost in addition to your order total.
Manufacturer: Fabtech
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
$7,199.80

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front lift includes the Dirt Logic 4.0 Stainless Steel Coilover Shock conversion and rear 2.25 Dirt Logic Stainless Steel shocks. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, U-bolt kit, and replacement rear Leaf Springs.

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.

TIRE SIZE - 37/13.50R20 WHEEL - 20X10 W/4 1/2" BS W/MINOR TRIMMING; TIRE SIZE - 355/65R18 WHEEL - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.; 29. REAR SPRINGS MAY REDUCE LOAD CARRYING CAPACITY.

Fabtech 08-10 Ford F250/350 4WD 8in Radius Arm System w/DL 4.0 Coilovers & Rear DL Shocks

8in. RAD ARM SYS W/DLSS 4.0 C/O/ RR DLSS 08-10 FORD F250/350 4WD

8in. RAD ARM SYS W/DLSS 4.0 C/O/RR DLSS 08-10 FORD F250/350 4WD

8" RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 08-10 FORD F250/350 4WD

8" RAD ARM SYS W/DLS

Suspension Lift Kit

LftKt-Suspw/Shock

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front lift includes the Dirt Logic 4.0 Stainless Steel Coilover Shock conversion and rear 2.25 Dirt Logic Stainless Steel shocks. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, U-bolt kit, and replacement rear Leaf Springs.

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.

TIRE SIZE - 37/13.50R20 WHEEL - 20X10 W/4 1/2" BS W/MINOR TRIMMING; TIRE SIZE - 355/65R18 WHEEL - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.; 29. REAR SPRINGS MAY REDUCE LOAD CARRYING CAPACITY.

Fabtech 08-10 Ford F250/350 4WD 8in Radius Arm System w/DL 4.0 Coilovers & Rear DL Shocks

8in. RAD ARM SYS W/DLSS 4.0 C/O/ RR DLSS 08-10 FORD F250/350 4WD

8in. RAD ARM SYS W/DLSS 4.0 C/O/RR DLSS 08-10 FORD F250/350 4WD

8" RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 08-10 FORD F250/350 4WD

8" RAD ARM SYS W/DLS

Suspension Lift Kit

LftKt-Suspw/Shock

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Ford

    F-250 Super Duty

      2010 Harley-Davidson Edition - 2010 King Ranch - 2010 Lariat - 2010 XL - 2010 XLT - 2009 FX4 - 2009 Harley-Davidson Edition - 2009 King Ranch - 2009 Lariat - 2009 XL - 2009 XLT - 2008 FX4 - 2008 King Ranch - 2008 XLT - 2008 XL - 2008 Lariat - 2008 Harley-Davidson Edition

    F-350 Super Duty

      2010 Harley-Davidson Edition - 2010 King Ranch - 2010 Lariat - 2010 XL - 2010 XLT - 2009 FX4 - 2009 King Ranch - 2009 XLT - 2009 XL - 2009 Lariat - 2009 Harley-Davidson Edition - 2008 FX4 - 2008 King Ranch - 2008 XLT - 2008 XL - 2008 Lariat - 2008 Harley-Davidson Edition
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.