Search
Filters
Close
Availability: Special Order*
SKU: K1030DL
Manufacturer: Fabtech
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
$5,040.66

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Includes front and rear 2.25 Dirt Logic Stainless Steel shocks.

TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 5/8" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X10 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 37/14.00R18 WHEEL - 18X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 10. REQUIRES WELDING, EXHAUST, AND POSSIBLE FRONT DRIVE SHAFT MODS.; 12. DOES NOT FIT MODELS WITH QUADRASTEER.; 14. CAN NOT USE OEM WHEEL AND TIRE.; 15. WILL EXPERIENCE SOME LOSS OF TURNING RADIUS.; 21. FRONT DRIVESHAFT MODIFICATION REQUIRED OR ORDER CV DRIVESHAFT (FTS91004)

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software; fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.

Fabtech 07-08 GM C/K2500HD C/K3500 Non Dually 8in Perf. System w/DL Shocks

8in. PERF SYS W/DLSS SHKS 07-08 GM C/K2500HD; C/K3500 NON DUALLY

8in. PERF SYS W/DLSS SHKS 07-08 GM C/K2500HD;C/K3500 NON DUALLY

8" PERF SYS W/DLSS SHKS 07-08 GM C/K2500HD,C/K3500 NON DUALLY

8" PERF SYS W/DLSS S

Suspension Lift Kit

LftKt-Suspw/Shock

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Includes front and rear 2.25 Dirt Logic Stainless Steel shocks.

TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 5/8" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X10 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 37/14.00R18 WHEEL - 18X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 10. REQUIRES WELDING, EXHAUST, AND POSSIBLE FRONT DRIVE SHAFT MODS.; 12. DOES NOT FIT MODELS WITH QUADRASTEER.; 14. CAN NOT USE OEM WHEEL AND TIRE.; 15. WILL EXPERIENCE SOME LOSS OF TURNING RADIUS.; 21. FRONT DRIVESHAFT MODIFICATION REQUIRED OR ORDER CV DRIVESHAFT (FTS91004)

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software; fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.

Fabtech 07-08 GM C/K2500HD C/K3500 Non Dually 8in Perf. System w/DL Shocks

8in. PERF SYS W/DLSS SHKS 07-08 GM C/K2500HD; C/K3500 NON DUALLY

8in. PERF SYS W/DLSS SHKS 07-08 GM C/K2500HD;C/K3500 NON DUALLY

8" PERF SYS W/DLSS SHKS 07-08 GM C/K2500HD,C/K3500 NON DUALLY

8" PERF SYS W/DLSS S

Suspension Lift Kit

LftKt-Suspw/Shock

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Chevrolet

    Silverado 2500 HD

      2008 WT - 2008 LT - 2008 LTZ - 2007 WT - 2007 LTZ - 2007 LT

    Silverado 3500 HD

      2008 WT - 2008 LTZ - 2008 LT - 2007 LT - 2007 LTZ - 2007 WT

GMC

    Sierra 2500 HD

      2008 WT - 2008 SLE - 2008 SLT - 2007 WT - 2007 SLE - 2007 SLT

    Sierra 3500 HD

      2008 SLE - 2008 SLT - 2008 WT - 2007 SLE - 2007 SLT - 2007 WT
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.