Search
Filters
Close

Exedy Universal Builder Series Triple Metallic Clutch Does NOT Incl FW Req- Custom Clutch Actuation

Availability: Special Order*
SKU: TYR300
Manufacturer: Exedy
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Old price: $2,075.79
$1,764.42

The new EXEDY Hyper Builder Series allows the racer or custom car builder to assemble a clutch kit to fit their specific application. These kits are similar to our Hyper Multi Plate kits, but are supplied WITHOUT a flywheel. The Builder Kits can be used with any of the available flywheels or with your custom made flywheel to match an EXEDY kit to virtually any transmission. All EXEDY Hyper Builder Series kits all come with HD clamp load and a push type diaphragm for use with a 44-54mm release bearing. The lightweight cerametallic clutch discs are all 200mm diameter with solid hub for reduced mass and high torque holding capacities. Clamp load on every kit is a pedal friendly 2653, which holds 615 torque on twin setups and 923 torque on Triples. All EXEDY Racing Hyper Builder Series Clutch Kits carry SFI 1.2/1.5 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.

For high-powered applications, EXEDY offers twin and triple Multi-Plate clutches. These are designed for high power street action as well as drag, road and rally racing. The twin plate clutches are rated for approximately 500 ft/lbs of torque and the triple plates are rated for approximately 800 ft/lbs of torque, both figures at the flywheel. Twins come with both spring damper discs or solid discs depending on application, whereas triples are all solid discs and not recommended for street use.

The new EXEDY Hyper Builder Series allows the racer or custom car builder to assemble a clutch kit to fit their specific application. These kits are similar to our Hyper Multi Plate kits, but are supplied WITHOUT a flywheel. The Builder Kits can be used w

Hyper Multi-Plate Clutch Kit; Triple; Metallic; 200mm.; Push Type; 21 Tooth/29.8mm Spline; Wheel Torque Rating 923 ft./lbs.; 2653 lbs. Clamp Load;

Exedy Universal Builder Series Triple Metallic Clutch Does NOT Incl FW Req. Custom Clutch Actuation

Builder Series Triple Metallic Clutch Kit; Does NOT Incl Flywheel; Require Custom Clutch Actuation

Builder Series Triple Metallic Clutch Kit

MultiPlate Clutch / Flywheel Kits

MultiPlate Clutch/Flywheel Kits

Hyper Multi-Plate Clutch Kit

Hyper Builder Series

Clutch Kit

The new EXEDY Hyper Builder Series allows the racer or custom car builder to assemble a clutch kit to fit their specific application. These kits are similar to our Hyper Multi Plate kits, but are supplied WITHOUT a flywheel. The Builder Kits can be used with any of the available flywheels or with your custom made flywheel to match an EXEDY kit to virtually any transmission. All EXEDY Hyper Builder Series kits all come with HD clamp load and a push type diaphragm for use with a 44-54mm release bearing. The lightweight cerametallic clutch discs are all 200mm diameter with solid hub for reduced mass and high torque holding capacities. Clamp load on every kit is a pedal friendly 2653, which holds 615 torque on twin setups and 923 torque on Triples. All EXEDY Racing Hyper Builder Series Clutch Kits carry SFI 1.2/1.5 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.

For high-powered applications, EXEDY offers twin and triple Multi-Plate clutches. These are designed for high power street action as well as drag, road and rally racing. The twin plate clutches are rated for approximately 500 ft/lbs of torque and the triple plates are rated for approximately 800 ft/lbs of torque, both figures at the flywheel. Twins come with both spring damper discs or solid discs depending on application, whereas triples are all solid discs and not recommended for street use.

The new EXEDY Hyper Builder Series allows the racer or custom car builder to assemble a clutch kit to fit their specific application. These kits are similar to our Hyper Multi Plate kits, but are supplied WITHOUT a flywheel. The Builder Kits can be used w

Hyper Multi-Plate Clutch Kit; Triple; Metallic; 200mm.; Push Type; 21 Tooth/29.8mm Spline; Wheel Torque Rating 923 ft./lbs.; 2653 lbs. Clamp Load;

Exedy Universal Builder Series Triple Metallic Clutch Does NOT Incl FW Req. Custom Clutch Actuation

Builder Series Triple Metallic Clutch Kit; Does NOT Incl Flywheel; Require Custom Clutch Actuation

Builder Series Triple Metallic Clutch Kit

MultiPlate Clutch / Flywheel Kits

MultiPlate Clutch/Flywheel Kits

Hyper Multi-Plate Clutch Kit

Hyper Builder Series

Clutch Kit

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*