Now you can get a complete Edelbrock E-Force supercharged Coyote engine for your Ford project vehicle. The core of this engine is a brand new Ford aluminum block built for high performance applications. The lightweight aluminum block features a forged and balanced crankshaft, forged Manley H-Beam connecting rods and Mahle forged aluminum pistons. This crate engine produced 785 hp and 660 ft-lbs. of torque at the flywheel when tested at the Edelbrock dyno facility. The 9.5:1 compression ratio allows for safe and reliable supercharged performance on 93 octane pump gas. Helping this engine breathe is the Edelbrock E-Force supercharger system. This great looking system features Eaton TVS R2650 rotors, which provide unparalleled efficiency, whisper quiet operation and OEM reliability. This engine package comes complete with essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb/hr. fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. Includes all front end drive accessories: water pump, alternator, idlers, tensioners, belts and hardware. Pair with universal heat exchangers for a complete installation. Visit Edelbrock.com for a complete listing and more information on our universal heat exchangers. This engine is the ultimate solution for the Ford enthusiast transplanting a Coyote powerplant into their project vehicle. It includes a complete engine with an E-Force Supercharger system installed, wiring harness, pre-programmed ECU, electronic throttle pedal, oxygen sensors, MAFS, OBD-II diagnostic port, air filter, fuse box, water pump, hose, alternator, belts, idlers and hardware.

Edelbrock supercharged 5.0L Ford Coyote crate engine part #46890 produced 785 hp and 660 ft-lbs. of torque (with 93 octane fuel) at the flywheel. The core of this engine is a brand new Ford lightweight aluminum block with forged and balanced crankshaft, forged Manley H-Beam connecting rods and Mahle forged aluminum pistons. Sitting on top is an Edelbrock supercharger with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the 8 rib drive belt, electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. Includes all front end drive accessories: water pump, alternator, idlers, tensioners, belts and hardware. Pair with universal heat exchangers for a complete installation. Engine Specifications: Finish: Black powder coated; Displacement: 5.0L (302 c.i.d.); Horsepower: 785 hp; Torque: 660 ft-lbs.; Compression: 9.5:1; Block: Ford Aluminum; Crankshaft: Forged; Pistons: Mahle Forged Aluminum; Rods: Manley Forged H-Bea; Camshafts: Stock Ford; Rocker Arms: Stock Ford 2-1 Ratio; Induction: Supercharger System; Cylinder Heads: Stock Four-Valve Aluminum w/ Boss 302 valve springs; Warranty: 2-year / Unlimited mileage

Edelbrock; crate engine; crate motor; 2 year warranty; new engine; intake manifold; distributor; valve covers; small-block Ford; Mod; Coyote; 5.0L ; oil pan; timing cover; camshaft; unlimited mileage warranty; 46757

Edelbrock, crate engine, crate motor, 2 year warranty, new engine, intake manifold, distributor, valve covers, small-block Ford, Mod, Coyote, 5.0L , oil pan, timing cover, camshaft, unlimited mileage warranty, 46757

Edelbrock 3.50in. part #15829 Polished pulley allows you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)

Crate Engine Sc 2015 Ford Coyote 5.0L Dp3C R2650 W/8-Rib Belt Drive W/Electronics.

CRATE ENGINE SC 2015 FORD COYOTE 5.0L DP3C R2650 W/8RIB BELT DRIVE W/ELECTRONICS

Supercharged 5.0L Coyote Crate Engine with Tuner

Ford:Small-Block Coyote:302 (5.0L)

Edelbrock Crate Engine

CRATE ENGINE

Engine Block

{ eo : 6in.}

{"eo":"6"}