Edelbrock Cylinder Head BBC BV3 Pro Port Hipd 11 Intake Valve

Intended for high output, large cubic inch racing engines with 4.84" bore spacing, this head is an improvement over existing 18° designs, such as the Big Chief & Big Duke. The casting is made from A-356 aluminum and is Hot Isostatic Pressing processed (HIP) for superior strength, durability, dimensional stability and exceptional finish quality. These cylinder heads feature CNC ported intake ports and a raised exhaust runner design for improved flow efficiency. Chambers are fully CNC ported and extra material is included in the deck to allow fine tuning of the combustion chamber design, if desired. Edelbrock and Pat Musi worked with Jesel to improve the valvetrain geometry, delivering Pro-Stock level technology on engines up to 10,000 rpm. Jesel's shaft-mounted system, #KPS-387154, is made from lightweight 7000 series aluminum and features a one-piece stand design that pairs the intake and exhaust stands for improved valvetrain stability. The intake features a 1.820" long fulcrum and is available in 1.60:1 - 1.95:1 rocker ratios; the exhaust features a 2.000" long fulcrum and available in 1.60:1 - 2.00:1 rocker ratios. Requires Edelbrock valve covers #4259. Match with Edelbrock Victor CNC Series manifolds #28003 and #28005. Pro-Port version available for custom porting.

The Edelbrock 614669 Big Block Chevy Big Victor III 11deg Pro-Port Cylinder head is designed specifically for the professional cylinder head porter and engine builder. Like the other Edelbrock Cylinder head, The Pro-Port cylinder head is also cast in the USA at the state-of-the-art Edelbrock Foundry with extra-thick walls to allow for custom CNC porting. In most cases, seats and manganese-bronze valve guides are included, but not installed. Please note: This head can not be used without professional head preparation.

Edelbrock Elite II Valve Covers for Ford 289/302/351W (except Boss). This new line of Elite II valve covers feature a design that is influenced by the original Elite Series originally released in 1985.

Edelbrock; BBC; Head; Big Block Chevy; Cylinder Head; HIP; 11 Degrees; Made In The USA;T-11; V8; Cylinder Heads; 614669

Edelbrock, BBC, Head, Big Block Chevy, Cylinder Head, HIP, 11 Degrees, Made In The USA,T-11, V8, Cylinder Heads, 614669

Cylinder Head; BBC; BV3 ; Pro Port; HIP d; 11deg. Intake Valve

Edelbrock Cylinder Head BBC BV3 Pro Port Hipd 11 Intake Valve

Pro Port BV3 Big-Block Chevy Cylinder Head HIP 11 Degrees

Chevrolet:Big-Block Race:-

Edelbrock Cyl Heads-Race

Chevrolet:Big-Block Race

Engine Cylinder Head

CYL HEADS-RACE

CYLINDER HEAD

{ eo : 9in.}

{"eo":"9"}

Cyl. Head