DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Save 15 percent over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors pads rotors and caliper lube. The benefits iof this kit over the S5 Kit is the reduced wind noise from the fine slotted USR series rotors.Kit includes EBC flagship GG rated yellowstuff high friction pads for maximum brake effect fully shimmed chamfered and slotted finished wth patented EBC Brake in coating for fast pad seating and USR sport slotted rotors.

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors pads rotors and caliper lube. The benefits iof this kit over the S5 Kit is the reduced wind noise from the fine slotted USR series rotors.Kit includes EBC flagship GG rated yellowstuff high friction pads for maximum brake effect fully shimmed chamfered and slotted finished wth patented EBC Brake in coating for fast pad seating and USR sport slotted rotors.

Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

S9 Kits Yellowstuff and USR Rotors; Front; FMSI Pad No. D635; Vented; 4 Bolt Holes; 254mm Dia.; 45mm Height; 20mm Thick; 55mm Center Hole Dia.;

Front S9K FMSI D635 2001 thru 2005 MAZDA Miata MX5 1.8 (Standard Suspension)

S9KF Kit Number FRONT Disc Brake Pad and Rotor Kit DP41002R+USR799

Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit

2001 thru 2005 MAZDA Miata MX5 1.8 (Normal Suspension)

EBC S9 Kits Yellowstuff Pads & USR Rotors

S9 Kits Yellowstuff and USR Rotors

94 thru 2001 MAZDA Miata MX5 1.8

S9KF1595 FRONT EBC Stage 9 Kit

Kit components DP41002R+USR799

Disc Brake Pad and Rotor Kit

DP41002R+USR799

EBC Stage 9 Kit

DscBrkPadRtr