Save 15 percent over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors for BOTH FRONT AND REAR axles and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking. Balanced and maximum Braking effect only happens when all brakes are working and the often forgotten rear brakes account for up to 40% of your vehicles stopping power. Renewing front and rear at the same time makes perfect sense.

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors for BOTH FRONT AND REAR axles and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking. Balanced and maximum Braking effect only happens when all brakes are working and the often forgotten rear brakes account for up to 40% of your vehicles stopping power. Renewing front and rear at the same time makes perfect sense.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

S20 Kits Ultimax and Plain Rotors; Incl. Rotors and Pads; Front; Rotor Dia. 11.6 in.;

S20K FRONT/REAR Disc Brake Pad and Rotor Kit UD866+RK7290+UD532+RK7468

2007 thru 2012 MITSUBISHI Galant 2WD 3.8 Ralliart

Stage 20 Kits Ultimax2 and RK Rotors Front+Rear

2006 thru 2012 MITSUBISHI Eclipse 2WD 3.8 GT

2007 thru 2012 MITSUBISHI Eclipse Spyder 3.8

Kit components UD866+RK7290+UD532+RK7468

S20K1700 FRONT/REAR EBC Stage 20 Kit

Disc Brake Pad and Rotor Kit

UD866+RK7290+UD532+RK7468

Stage 20 Kits Ultima

EBC Stage 20 Kit