Search
Filters
Close
Availability: Special Order*
SKU: S1KR1451
Manufacturer: EBC
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Old price: $245.80
$233.51

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Save 15 percent over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking

Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

S1 Kits Ultimax 2 and RK Rotors; Rear; FMSI Pad No. D998; Solid; 5 Bolt Holes; 312mm Dia.; 59mm Height; 14mm Thick; 82mm Center Hole Dia.;

S1KR Kit Number REAR Disc Brake Pad and Rotor Kit UD998+RK7273

Rear S1K FMSI D998 2007 thru 2008 CHRYSLER Pacifica 4.0

Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit

EBC S1 Kits Ultimax Pads & RK rotors

2004 thru 2008 CHRYSLER Pacifica 3.8

2007 thru 2008 CHRYSLER Pacifica 4.0

2005 thru 2007 CHRYSLER Pacifica 3.5

S1 Kits Ultimax 2 and RK Rotors

S1 Kits Ultimax and RK rotors

S1KR1451 REAR EBC Stage 1 Kit

Disc Brake Pad and Rotor Kit

Kit components UD998+RK7273

EBC Stage 1 Kit

DscBrkPadRtr

UD998+RK7273

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Save 15 percent over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking

Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

S1 Kits Ultimax 2 and RK Rotors; Rear; FMSI Pad No. D998; Solid; 5 Bolt Holes; 312mm Dia.; 59mm Height; 14mm Thick; 82mm Center Hole Dia.;

S1KR Kit Number REAR Disc Brake Pad and Rotor Kit UD998+RK7273

Rear S1K FMSI D998 2007 thru 2008 CHRYSLER Pacifica 4.0

Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit

EBC S1 Kits Ultimax Pads & RK rotors

2004 thru 2008 CHRYSLER Pacifica 3.8

2007 thru 2008 CHRYSLER Pacifica 4.0

2005 thru 2007 CHRYSLER Pacifica 3.5

S1 Kits Ultimax 2 and RK Rotors

S1 Kits Ultimax and RK rotors

S1KR1451 REAR EBC Stage 1 Kit

Disc Brake Pad and Rotor Kit

Kit components UD998+RK7273

EBC Stage 1 Kit

DscBrkPadRtr

UD998+RK7273

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Chrysler

    Pacifica

      2008 Limited - 2008 LX - 2008 Touring - 2007 Touring - 2007 Base - 2007 Limited - 2006 Base - 2006 Limited - 2006 Touring - 2005 Base - 2005 Touring - 2005 Limited - 2004 Base

    Town & Country

      2008 Limited - 2008 Touring - 2007 Limited - 2007 Touring - 2006 Limited - 2006 Touring - 2005 LX - 2005 Touring - 2005 Limited - 2004 EX - 2004 Limited - 2004 Touring
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.