DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Save 15 percent over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking

Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

S1 Kits Ultimax 2 and RK Rotors; Front; FMSI Pad No. D1081; Vented; 5 Bolt Holes; 293mm Dia.; 48mm Height; 30mm Thick; 71.1mm Center Hole Dia.;

S1KF Kit Number FRONT Disc Brake Pad and Rotor Kit UD1081+RK7253

Front S1K FMSI D1081 2005 thru 2010 FORD Mustang (5th Gen) 4.0

Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit

2005 thru 2010 FORD Mustang (5th Gen) 4.0

EBC S1 Kits Ultimax Pads & RK rotors

S1 Kits Ultimax 2 and RK Rotors

S1KF1026 FRONT EBC Stage 1 Kit

S1 Kits Ultimax and RK rotors

Disc Brake Pad and Rotor Kit

Kit components UD1081+RK7253

EBC Stage 1 Kit

UD1081+RK7253

DscBrkPadRtr