Search
Filters
Close
Availability: 143 in stock
SKU: DP41003R
Manufacturer: EBC
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Old price: $87.01
$82.66

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range REAR Disc Brake Pad Set FMSI D636

2001 thru 2005 MAZDA Miata MX5 1.8 (Normal Suspension)

EBC 97-02 Ford Escort 2.0 Yellowstuff Rear Brake Pads

95 thru 98 MAZDA Protege 1.8 (Rear Rotord)

Yellowstuff Street And Track Brake Pads;

DP41003R REAR EBC Yellowstuff Pads

99 thru 2001 FORD Escort 2.0 ZX2

94 thru 2001 MAZDA Miata MX5 1.8

97 thru 99 MERCURY Tracer 2.0

97 thru 2002 FORD Escort 2.0

2001 thru 2003 FORD ZX2 2.0

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars

EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.

Yellowstuff Our Flagship range REAR Disc Brake Pad Set FMSI D636

2001 thru 2005 MAZDA Miata MX5 1.8 (Normal Suspension)

EBC 97-02 Ford Escort 2.0 Yellowstuff Rear Brake Pads

95 thru 98 MAZDA Protege 1.8 (Rear Rotord)

Yellowstuff Street And Track Brake Pads;

DP41003R REAR EBC Yellowstuff Pads

99 thru 2001 FORD Escort 2.0 ZX2

94 thru 2001 MAZDA Miata MX5 1.8

97 thru 99 MERCURY Tracer 2.0

97 thru 2002 FORD Escort 2.0

2001 thru 2003 FORD ZX2 2.0

EBC YELLOWSTUFF PADS

EBC Brakes Yellowstu

Disc Brake Pad Set

Disc Brake Pad

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Mazda

    Miata

      2005 Base - 2005 LS - 2005 Mazdaspeed - 2004 Mazdaspeed - 2004 Base - 2004 LS - 2003 Base - 2003 LS - 2003 SE - 2003 Shinsen - 2002 Base - 2002 LS - 2002 SE - 2001 Base - 2001 LS - 2001 SE - 2000 Base - 2000 LS - 2000 SE - 1999 10th Anniversary - 1999 Base - 1997 Base - 1997 M Edition - 1997 STO - 1996 Base - 1996 M Edition - 1995 Base - 1995 M Edition - 1994 Base - 1994 M Edition

    Protege

      1998 DX - 1998 LX - 1998 ES - 1997 ES - 1997 DX - 1997 LX - 1996 ES - 1996 DX - 1996 LX - 1995 DX - 1995 ES - 1995 LX

Ford

    Escort

      2003 ZX2 - 2002 ZX2 - 2002 SE - 2001 SE - 2001 ZX2 - 2000 ZX2 S/R - 2000 ZX2 - 2000 LX - 1999 ZX2 S/R - 1999 LX - 1999 SE - 1999 ZX2 Cool Coupe - 1999 ZX2 Hot Coupe - 1998 ZX2 Hot Coupe - 1998 ZX2 Cool Coupe - 1998 LX - 1998 SE - 1997 Base - 1997 LX - 1997 Sport

Mercury

    Tracer

      1999 GS - 1999 LS - 1999 Trio - 1998 GS - 1998 LS - 1998 Trio - 1997 Trio - 1997 LS - 1997 GS
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.