Search
Filters
Close

EBC 2015+ Ford Mustang 6th Gen 5-2L GT350 Shelby Redstuff Rear Brake Pads

Availability: Special Order*
SKU: DP33056C
Manufacturer: EBC
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Old price: $164.10
$155.90

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports; muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Rear Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

EBC 2015+ Ford Mustang (6th Gen) 5.2L (GT350) Shelby Redstuff Rear Brake Pads

Redstuff Premium Street REAR Disc Brake Pad Set FMSI D1854

2015 and up FORD Mustang (6th Gen) 5.2 (GT350) Shelby

EBC Redstuff Ceramic Low Dust Brake Pads

DP33056C REAR EBC Redstuff Pads

Disc Brake Pad Set

EBC Redstuff Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports; muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Rear Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

EBC 2015+ Ford Mustang (6th Gen) 5.2L (GT350) Shelby Redstuff Rear Brake Pads

Redstuff Premium Street REAR Disc Brake Pad Set FMSI D1854

2015 and up FORD Mustang (6th Gen) 5.2 (GT350) Shelby

EBC Redstuff Ceramic Low Dust Brake Pads

DP33056C REAR EBC Redstuff Pads

Disc Brake Pad Set

EBC Redstuff Pads

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Ford

    Mustang

      2022 Shelby GT500 - 2022 Mach 1 - 2022 GT Premium - 2022 GT - 2022 EcoBoost Premium - 2022 EcoBoost - 2021 GT - 2021 Shelby GT500 - 2021 GT Premium - 2021 EcoBoost Premium - 2021 EcoBoost - 2021 Mach 1 - 2020 Shelby GT500 - 2020 Shelby GT350R - 2020 Shelby GT350 - 2020 GT - 2020 GT Premium - 2020 EcoBoost - 2020 EcoBoost Premium - 2020 Bullitt - 2019 Bullitt - 2019 EcoBoost - 2019 EcoBoost Premium - 2019 GT - 2019 GT Premium - 2019 Shelby GT350 - 2019 Shelby GT350R - 2018 Shelby GT350 - 2018 Shelby GT350R - 2018 GT - 2018 GT Premium - 2018 EcoBoost - 2018 EcoBoost Premium - 2017 EcoBoost - 2017 EcoBoost Premium - 2017 GT - 2017 GT Premium - 2017 Shelby GT350 - 2017 Shelby GT350R - 2017 V6 - 2016 EcoBoost - 2016 EcoBoost Premium - 2016 GT - 2016 GT Premium - 2016 V6 - 2016 Shelby GT350 - 2016 Shelby GT350R - 2015 Shelby GT350 - 2015 Shelby GT350R - 2015 GT - 2015 V6 - 2015 EcoBoost - 2015 GT Premium - 2015 GT 50 Years Limited Edition - 2015 EcoBoost Premium
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.