COMP Cams Pushrod Hi-Tech 3-8 10-800

The pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today's all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Tech Pushrods fill that requirement. Hi-Tech Pushrods feature a one-piece design from .080? wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are O.D. ground for consistency and black-oxide finished with length and part number laser etched on the O.D. for ease of identification.

Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 10.800" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.

Chromemoly Pushrod; Pushrod Set; Wall Thickness; 1 Piece Pushrod; Ball Pushrod; 5/16" Pushrod; .080" Wall Pushrod; Pushrods; OHV Pushrods; Replacement Pushrods

Hi-Tech 10.800" Long, .080" Wall, 3/8" Diameter Pushrod

Hi-Tech 10.800".080" Wall, 3/8" Pushrod

Available in a set of 16 under 8734-16

COMP Cams Pushrod Hi-Tech 3/8 10.800

Engine Push Rod

None