COMP Cams HRT Turbo Stage 2 Hydraulic Roller Camshaft 03-08 Dodge 5-7-6-1L Hemi

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads. Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The Low Shock Technology features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads. Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.

Best camshaft for larger turbochargers with optimized low backpressure hot side. Dyno tested to 7500+ RPM. (Req DOD delete, 7228 springs & Phaser LOCK)

53022065AB; Challenger; Charger; R/T; SRT; Magnum; HEMI; 5.7; 6.1; Hell Cat; 6.2; 300; Chrysler; MOPAR; 6.4; Dodge; Plymouth; SRT 8; 392; Scat Pack

COMP Cams HRT Turbo Stage 2 Hydraulic Roller Camshaft 03-08 Dodge 5.7/6.1L Hemi

HRT Turbo Stage 2 Hydraulic Roller Camshaft for '03-'08 Dodge 5.7/6.1L HEMI

Blower options available under 112-335-11 and 112-337-11

Dodge 5.7/6.1L HEMI Engines w/o VVT

Engine Camshaft

HRTrbo HEMI

None