DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Save 15 percent over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. If you desire a modest brake improvement at speeds or higher heat and load on any sports compact or sedan this Kit will be your best choice.High efficiency EBC pads built with Aramid fiber,fully shimmed,slotted and chamfered and featuring the EBC patented Brake-in coating for fast pad seating after install. Matched with fine slot sport vented rotors for cooler brakes and lifetime perfect flat and parallel pad wear finished with Geomet anti rust coating.

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. If you desire a modest brake improvement at speeds or higher heat and load on any sports compact or sedan this Kit will be your best choice.High efficiency EBC pads built with Aramid fiber,fully shimmed,slotted and chamfered and featuring the EBC patented Brake-in coating for fast pad seating after install. Matched with fine slot sport vented rotors for cooler brakes and lifetime perfect flat and parallel pad wear finished with Geomet anti rust coating.

Save 10percent buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.

S2 Kits Greenstuff 2000 and USR Rotors; Rear; FMSI Pad No. D1082; Vented; 5 Bolt Holes; 300mm Dia.; 35mm Height; 19mm Thick; 70.6mm Center Hole Dia.;

S2KR Kit Number REAR Disc Brake Pad and Rotor Kit DP21741+USR7254

Rear S2K FMSI D1082 2005 thru 2010 FORD Mustang (5th Gen) 4.0

Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit

2005 thru 2010 FORD Mustang (5th Gen) 4.0

EBC S2 Kits Greenstuff Pads & USR Rotors

S2 Kits Greenstuff 2000 and USR Rotors

Kit components DP21741+USR7254

S2KR1739 REAR EBC Stage 2 Kit

Disc Brake Pad and Rotor Kit

DP21741+USR7254

EBC Stage 2 Kit

DscBrkPadRtr