There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.

Front Redstuff 3000 series Red Ceramic Pads are for the fastest street use or Premium sedan fitment. Both Red Ceramic and 7000 SUV pads are our lowest dust ranges

Greenstuff 7000 & Redstuff Premium Street FRONT Disc Brake Pad Set FMSI D555

EBC Redstuff Ceramic Low Dust Brake Pads; Incl. Fixed Wear Lead;

EBC 91-94 Audi 100 Quattro 2.8 (ATE) Redstuff Front Brake Pads

97 thru 99 AUDI A8 quattro 4.2 (4 Pad Set)

98 thru 99 VOLKSWAGEN Passat 2.8 4 Motion

96 thru 98 VOLKSWAGEN Jetta Mk3 2.8 VR6

96 thru 98 VOLKSWAGEN Golf Mk3 2.8 VR6

98 thru 99 VOLKSWAGEN Passat 1.8 Turbo

91 thru 94 AUDI 100 quattro 2.8 (ATE)

96 thru 98 VOLKSWAGEN GTi Mk3 2.8 VR6

96 thru 97 VOLKSWAGEN Passat 2.8 VR6

97 thru 98 AUDI A4 quattro 1.8 Turbo

96 thru 98 AUDI A4 1.8 Turbo (B5)

DP3836C FRONT EBC Redstuff Pads

96 thru 98 AUDI A4 quattro 2.8

95 thru 98 AUDI A6 quattro 2.8

EBC REDSTUFF CERAMIC PADS

99 thru 2000 AUDI A8 3.7

96 thru 98 AUDI A4 2.8

95 thru 97 AUDI A6 2.8

96 thru 98 AUDI A8 3.7

EBC Brakes Redstuff

Disc Brake Pad Set

EBC REDSTUFF PADS

Disc Brake Pad