Search
Filters
Close

BMR 82-82 3rd Gen F-Body w- TPI 3 Point Mount Strut Tower Brace - Black Hammertone

Availability: 6 in stock
SKU: STB004H
Manufacturer: BMR Suspension
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
$309.95

Reduce chassis flex and increase handling and performance on your 3rd Gen GM F-body with a Three-Point Strut Tower Brace from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR?s Strut Tower Braces are manufactured from a mix 1 ?-inch DOM steel tubing and laser-cut 1/4-inch steel plate. This design adds loads of strength to the front frame and suspension. These Strut Tower Braces are engineered to considerably strengthen the chassis. The STB004s connect the strut mounts to reinforce unibody and suspension.

Fits 1982-1992 TPI equipped GM F-bodies;Dramatically increases chassis stiffness and improves handling ;Manufactured from 1 ?-inch DOM steel tubing;Uses 1/4-inch laser-cut steel plate;100% bolt-in design;Fully MIG-welded;Designed for street performance, drag race, and handling applications;Proudly designed and made in the U.S.A.

BMR has designed the STB004 for the street performance, drag race, and handling applications. This two-point design solidly links the front strut towers, adding strength to the entire front unibody and suspension.

BMR 82-82 3rd Gen F-Body w/ TPI 3 Point Mount Strut Tower Brace - Black Hammertone

Strut Tower Brace, 3 Point Mount, TPI Only

BMR Suspension - STB004H

Suspension Strut Tower

Strut Tower Brace

Reduce chassis flex and increase handling and performance on your 3rd Gen GM F-body with a Three-Point Strut Tower Brace from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR?s Strut Tower Braces are manufactured from a mix 1 ?-inch DOM steel tubing and laser-cut 1/4-inch steel plate. This design adds loads of strength to the front frame and suspension. These Strut Tower Braces are engineered to considerably strengthen the chassis. The STB004s connect the strut mounts to reinforce unibody and suspension.

Fits 1982-1992 TPI equipped GM F-bodies;Dramatically increases chassis stiffness and improves handling ;Manufactured from 1 ?-inch DOM steel tubing;Uses 1/4-inch laser-cut steel plate;100% bolt-in design;Fully MIG-welded;Designed for street performance, drag race, and handling applications;Proudly designed and made in the U.S.A.

BMR has designed the STB004 for the street performance, drag race, and handling applications. This two-point design solidly links the front strut towers, adding strength to the entire front unibody and suspension.

BMR 82-82 3rd Gen F-Body w/ TPI 3 Point Mount Strut Tower Brace - Black Hammertone

Strut Tower Brace, 3 Point Mount, TPI Only

BMR Suspension - STB004H

Suspension Strut Tower

Strut Tower Brace

Write your own review
*
*
  • Bad
  • Excellent
*
*
*
*

Vehicle Fitment

Chevrolet

    Camaro

      1992 RS - 1992 RS Heritage Edition - 1992 Z28 - 1992 Z28 Heritage Edition - 1991 RS - 1991 Z28 - 1990 Iroc-Z - 1990 RS - 1989 Iroc-Z - 1989 RS - 1988 Iroc-Z - 1988 Base - 1987 LT - 1987 Sport - 1987 Z28 - 1987 Iroc-Z - 1986 Z28 - 1986 Sport - 1986 Berlinetta - 1986 Iroc-Z - 1985 Berlinetta - 1985 Sport - 1985 Z28 - 1985 Iroc-Z - 1984 Z28 - 1984 Sport - 1984 Berlinetta - 1983 Berlinetta - 1983 Sport - 1983 Z28 - 1982 Z28 Indianapolis 500 Pace Car - 1982 Sport - 1982 Z28 - 1982 Berlinetta

Pontiac

    Firebird

      1992 Base - 1992 Formula - 1992 Trans Am - 1992 Trans Am GTA - 1991 Trans Am GTA - 1991 Trans Am - 1991 Formula - 1991 Base - 1990 Base - 1990 Formula - 1990 Trans Am - 1990 Trans Am GTA - 1989 Trans Am GTA - 1989 Trans Am - 1989 Formula - 1989 Base - 1989 Trans Am GTA SE - 1988 Base - 1988 Trans Am - 1987 Trans Am - 1987 Base - 1986 Base - 1986 Trans Am - 1986 S/E - 1985 S/E - 1985 Trans Am - 1985 Base - 1984 Base - 1984 S/E - 1984 Trans Am - 1983 Base - 1983 Trans Am - 1983 S/E - 1982 Base - 1982 S/E - 1982 Trans Am
*we take fitment seriously and have invested heavily into matching products to your vehicle, but it is up to the end user to confirm products are suitable for their vehicle, legal for them to use for the purposes they intend, and verify fitment upon installation. Many opened products may not be returned, so if fitment is in question, please contact us before ordering. We are not resonsible for any costs incurring from a product not being suitable to an end users application.