Hard launches from high horsepower cars at the drag strip require more that just a normal street-style sway bar. BMR Suspension?s Xtreme Anti Roll Bar for 1982-2002 GM F-body allows you to launch harder without excessive body roll limiting traction, with little sacrifice to your Camaro?s street manners. Manufactured from heavy-wall 1.375-inch DOM tubing, BMR?s Xtreme Anti Roll Bar (XSB001) is designed to eliminate body roll and transfer as much power as possible to the rear wheels. The XSB001 attaches to your F-body with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 95-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing under high compression loads. The fabricated laser cut, steel sway bar arms are reinforced to add strength and minimize deflection.

Fits 1982-2002 GM F-body;Designed for street performance and drag race applications;Fits 3" and 3.25" axle tubes;100% bolt-in design;Dramatically reduces body roll;Massive increase in sway bar rate over stock sway bar (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 1.375-inch heavy-wall DOM tubing for increased strength;Two-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

BMR Suspension designed the XSB001 sway bar for drag race and limited street applications. The large adjustable sway bar has two positions, giving you the versatility to drive to the track and race at the track with the same sway bar.

BMR 82-02 3rd Gen F-Body w/ 3.0-3.25in Axles Rear Hollow 1.375in Xtreme Anti-Roll Kit - Red

Xtreme Anti-roll Kit, Rear, Hollow 1.375", 3" Or 3.25" Axles

Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit

BMR Suspension - XSB001R

Anti-roll Bar Kit