Banks Power 00-06 Toyota 3-4-4-0-4-7L Tundra Monster Exhaust System - SS Single Exhaust w- Black Tip

3 inch stainless mandrel-bent cat-back pipes and straight-thru muffler cut backpressure by 76%, improve flow by 114%, and add up to 11 hp and 11 lb-ft. Improves acceleration, too! throaty sound, 4 inch polished tip. TUNDRA PICKUP: Monster exhaust system's 3 inch mandrel-bent pipes are formed of stainless, heavy-wall tubing and bolt behind the catalytic converter, slashing backpressure by 76%. Banks' free-flowing, straight-through polished-stainless Monster muffler has very-high-temperature packing, and is sound-tested to deliver a rich, throaty sound without the annoying drone. The system more than doubles the stock flow, increasing it by 114%. As a result, the Tundra engine is able to produce up to 11 more hp and 11 more lb-ft of torque, which means better acceleration. Reducing backpressure and enhancing the exhaust flow increase fuel efficiency, as well. For an eye-catching finish, Monster flashes a stainless 4 inch dual-wall rolled-edge angle-cut tailpipe tip in your choice of polished chrome-over stainless or high-temp black! Banks' Monster exhaust system is vehicle-specific for bolt-on installation. Includes: Polished-stainless 3 inch straight-through Monster muffler, Stainless 3 inch constant-diameter intermediate pipe and tailpipe, Polished-stainless 4 inch dual-wall angle-cut tailpipe tip with rolled edge, Mounting hardware.

Stainless constant-diameter pipes and straight-thru muffler nearly doubles flow. Lower exhaust temps. Virtually no backpressure. Rich, throaty sound. Monster exhaust system flows better than stock and virtually eliminates backpressure. The streamlined intermediate pipe(s) and tailpipe are formed of stainless, heavy-wall tubing with constant-diameter bends to maximize flow and lower exhaust gas temps. Banks replaces the factory's restrictive muffler with a polished-stainless steel Monster muffler, featuring a straight-through flow-path with a Banks-designed expansion chamber which dissipates the annoying mid-range exhaust drone that's so prominent in competitors' straight-through mufflers. The muffler utilizes spun ceramic, very-high-temperature packing, more than doubles the stock flow and delivers an authoritative - but never intrusive - exhaust sound. A stainless steel tailpipe tip in your choice of polished chrome-over stainless or high-temp black sports a rolled edge. And to help keep it looking good, there's a 1/2 inch air gap to keep heat from tarnishing the finish. An adjustable clamp lets you position it on the tailpipe just right.

Cuts back pressure up to 76 Percent Improves flow up to 114 Percent Add up to 11 hp and 11 lb-ft 3 inch mandrel-bent cat-back pipes Straight-thru muffler 4 inch Black tip

Cuts backpressure up to 76%;Improves flow up to 114%;Add up to 11 hp and 11 lb-ft;3 inch mandrel-bent cat-back pipes;Straight-thru muffler;4 inch BLACK tip

Banks Power 00-06 Toyota 3.4/4.0/4.7L Tundra Monster Exhaust System - SS Single Exhaust w/ Black Tip

Monster Exhaust System; S/S-Black Tip-2000-06 Toyota 3.4; 4.0; 4.7L Tundra

Monster Exhaust System, Single Exit, Black Tip

Monster Exhaust System; Single Exit; Black Tip

2000-2006 Toyota 3.4L, 4.0L, 4.7L Tundra

Monster Exhaust System

Exhaust System Kit